SP-6000 High Power Switching Power Supply - WEHO

SP-6000 High Power Switching Power Supply

SP-6000 is a 6KW single output chassis type AC to DC power supply.
Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

 

خصوصیات

1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control

 

Technical Parameters

ماڈل SP-6000-24 SP-6000-36 SP-6000-48 SP-6000-60 SP-6000-110 SP-6000-220
آؤٹ پٹ ڈی سی وولٹیج 24V 36V 48V 60V 110V 220V
شرح شدہ کرنٹ 250A 166.6A 125A 100A 54.5A 27.2A
موجودہ رینج   0 – 250A 0 – 166.6A 0 – 125A 0 – 100A 0 – 54.5A 0 – 27.2A
ریٹیڈ پاور 6000W
لہر 500mV 500mV 600mV 600mV 1000mV 1500mV
مستقل موجودہ بہترین حد 12 – 24V 18 – 36V 24 – 48V 30 – 60V 55 – 110V 110 – 220V
شرح شدہ وولٹیج کی درستگی ± 1.0%
لائن ریگولیشن ± 1.0%
لوڈ ریگولیشن ± 1.0%
Startup & Rise Time 1500mS,700mS/230VAC(Fully loaded)
ان پٹ وولٹیج کی حد 95-190VAC(Output Current 50%),195-265VAC(Output Current 100%)
تعدد کی حد 45Hz – 65Hz
پاور فیکٹر PF≧0.99/230VAC(Fully loaded)
کارکردگی (MAX) 90 % 91.5 % 92 % 92 % 92.5 % 93 %
Ac Current <56A
رساو کرنٹ <3.0mA / 240VAC
حفاظت کرنا شارٹ سرکٹ When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting.
Overcurrent The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
زیادہ دباؤ Users can set the overvoltage value to shut down the output voltage, and restore after restart
زیادہ درجہ حرارت Shut down the output, automatically recover or restart after the temperature drops
فنکشن آؤٹ پٹ وولٹیج ایڈجسٹمنٹ 0 – 26.4V 0 – 39.6V 0 – 52.8V 0 – 66V 0 – 121V 0 – 242V
آؤٹ پٹ مسلسل موجودہ ایڈجسٹمنٹ 0 – 250A 0 – 166.6A 0 – 125A 0 – 100A 0 – 54.5A 0 – 27.2A
485 مواصلات موڈبس کمیونیکیشن پروٹوکول
Isolated auxiliary power supply 12V 0.5A  (Need customization)
آؤٹ پٹ ریموٹ سوئچ Default power on, high level power off   (5V-12V)  (Need customization)
الارم سگنل آؤٹ پٹ Power Good Signal (Dry Contact≦ 36V,0.1A)(Need customization)
Environment آپریٹنگ درجہ حرارت -20 – +60℃
آپریٹنگ نمی -20 – 90% RH No condensation
ذخیرہ کرنے کا درجہ حرارت اور نمی -40 – +85℃, 10 – 95% RH No condensation
کمپن مزاحمت 10 – 500Hz, 2G 10 Min/Cycle, X、Y、Z  60 Min
Safety Regulations موصلیت مزاحمت Input to Output:100Mhms/500VDC/25℃/70%RH
دباؤ کی مزاحمت I/P-O/P :2KVAC I/P-FG :2KVAC O/P-FG :0.5KVAC
Other سائز 432*179*242mm(L*W*H)
Net Weight 9 KG
تبصرہ 1. All parameters are measured at 230VAC input voltage, rated load and 25℃ unless otherwise specified.
2. Ripple and noise voltage are measured with a 20MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the end of a 12-inch twisted pair, and measured at 20MHZ bandwidth.
3. Accuracy: includes setting error, linear regulation rate and load regulation rate.
4. Output must be derated for low input voltage conditions, please refer to the static characteristic curve for details.
5. Startup time is measured under cold start, and frequent switching may increase the startup time.

 

Static characteristic curve

SP-6000 High Power Switching Power Supply  title=

 

آپ کے کاروبار کے لیے پاور سپلائی کی بہترین مصنوعات کون سی ہیں؟

WEHO کوالٹی پاور سپلائی مصنوعات کے ساتھ اپنے کاروبار کو فروغ دیں۔.

کسی ماہر سے پوچھیں۔

واٹس ایپ

ای میل ایڈریس