| 모델 | 12V 36W | 24V 36W | |
| 산출 | 정격전압 | 12V | 24V |
| 정격전류 | 3A | 1.5A | |
| 출력 전압 범위 | 11.7-12.2V | 23.7-24.2V | |
| 정격 출력 | 36W | 36W | |
| 능률 | >86% | >88% | |
| 잔물결과 소음 | <180mV | <180mV | |
| 부하 조정 비율 | 1% | ||
| Liner adjustment Rate | 1% | ||
| 입력 | 입력 전압 범위 | 100～265V AC | |
| AC 입력 전류 | 0.3A 230V | ||
| PF 가치 | >0.65 | ||
| 주파수 범위 | 50~60Hz | ||
| 콜드 스타트 전류 | 20A/230VAC | ||
| 보호 특성 |
전원 보호 | 전압이 정격 출력 전력의 105%를 초과하면 회로는 자동으로 출력 전압을 줄입니다. | |
| 단락 보호 | 히컵 모드에서는 비정상적인 상황이 해결되면 정상 작동을 재개할 수 있습니다. | ||
| 환경 | 작동 온도, 습도 | -40℃~ +70℃ 20%~90%RH | |
| 보관 온도, 습도 | -40℃~85℃ 10%~95%RH | ||
| 안전 규정 | 내전압 성능 | I/P-O/P: AC2.5KV 5mA 60S; I/P-FG: AC2KV 5mA 60S |
|
| 절연 임피던스 | I/P-O/P: 100M 옴/500VDC/25℃ | ||
| 포장 | 제품 차원 | 117*35*22mm | |
| 북서쪽 | 0.12kg | ||
| 금액/G.W/크기 | 186PCS/22kg/460*340*185mm | ||
초박형 LED 전원 공급 장치 DC 12V 24V 조명 변압기 36W
The Ultra Thin LED Power Supply DC 12V 24V Lighting Transformers 36W is meant for LED Commercial Lighting, such as in restaurants, hotels, shopping malls, airports, parking lots, lightbox billboards, shop signboards, and home decoration lighting.
It can also be used for LED light strips, LED light drivers, luminous words, lightbox posters, line lights, LED wine cabinet lights, etc.If you have any questions, please do not hesitate to contact us at 이메일: [email protected]우리 전문가들이 가능한 한 빨리 답변해 드리겠습니다.
- 설명
초박형 LED 전원 공급 장치 DC 12V 24V 조명 변압기 36W
- It is an aluminum alloy casing for easy heat dissipation and natural air cooling.
- It is IP20-rated and suitable for all weather conditions.
- Its ripple noise: ≤200mv, almost silent mode.
- It has an efficiency of 83% (80% load recommended) without exceeding the rated power.
- It has output overvoltage, overcurrent, short circuits, and other safety protection.
- It has an ultra-thin, small size, high-power design.
- The electrical connection is simple, efficient, and safe.
- It has a long service life, high reliability, and a 2-year warranty.
Tips:
1. Maintaining a good ventilation environment is conducive to the heat dissipation of the power supply, which is very important to prolong the service life of the power supply.
2. The connecting wire between the power output and the load should follow the principle of short routing. The connecting wire that is too long or the core is too small will cause a voltage drop on the line, and the loss on the connecting wire will turn into heat, which is easy causes safety hazards. (the grounding wire should follow: 1mm ² 6A current is allowed).
3. A short circuit of the load will cause automatic protection of the power supply and make the power supply unable to work normally.
4. Wiring shall be in strict accordance with the principle of safe use of electricity.
