Cangkerang plastik 5V/12V/24V/48V dc bekalan kuasa dinrail 100w

MDR-100 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Model		MDR-100-12	MDR-100-15	MDR-100-24	MDR-100-48
Output	Voltan DC	12v	15v	24V	48v
	Arus dinilai	7.5A	6.7A	4A	2A
	Julat Semasa	0 ~ 7.5A	0 ~6.7A	0 -4A	0-2A
	Kuasa dinilai	100W	100W	100W	100W
	Ripple & Noise (Max.)	80mvp-p	120mvp-p	150mvp-p	200mVp-p
	Volage ADJ Range	12 -13.2V	15-16.5V	24 – 26.4V	48 ~ 56V
	Toleransi voltan	± 2.0%	± 1.0%	± 1.0%	± 1.0%
	Peraturan garis	± 1.0%	± 1.0%	± 1.0%	± 1.0%
	Peraturan beban	±1.5%	± 1.0%	± 1.0%	± 1.0%
	Persediaan, Nota Masa Bangkit.5	500ms, 30ms/230VAC 500ms, 30ms/115VAC pada beban penuh
	Masa Tahan (Jenis)	50ms/230vac 20ms/115VAC pada beban penuh
Input	Julat voltan	85~264VAC 120~370VDC
	Julat kekerapan	47 ~ 63Hz
	Kecekapan (typ.)	78%	86%	88%	87%
	AC Current(Typ.)	1.8A/115VAC 1A/230VAC
	Inrush Current (typ.)	Cold start: 30A/115VAC, 60A/230VAC
	Arus kebocoran	<1mA/240VAC
Perlindungan	Lebihan beban	105% – 150% rated output power
		Jenis perlindungan: Pengehadan arus malar, pulih secara automatik selepas keadaan kerosakan dialihkan
	Overvoltage	6.25-7.25V	15.6 – 18V	31.2-36V	57.6 – 64.8V
		Jenis Perlindungan: Tutup voltan O/P, kuasa semula untuk pulih
Fungsi	DC Signal	Relay contact rating (max.): 30V/1A resistive
Persekitaran	Kelembapan bekerja	20% ~ 90%RH tidak pemeluwapan
	Tempatan Penyimpanan, Kelembapan	-40°C ~ +85°C, 10% ~ 95%RH
	Pekali temp	±0.03%/°C (0 – 50°C)
	Getaran	Component: 10 – 500Hz, 2G 10min./1 cycle, the period for 60min. each along X, Y, and Z axes; Mounting: Compliance to IEC60068-2-6
Keselamatan & EMC	Piawaian keselamatan	UL508, UL60950-1, TUV EN60950-1 approved
	Menahan voltan	l/P-0/P: 3KVAC l/P-FG: 2KVAC 0/P-FG: 0.5KVAC
	Rintangan pengasingan	l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH
	EMC Emission	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	EMC Immunity	Compliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
Yang lain	Mtbf	299.2K hrs min. MIL-HDBK-217F (25°C)
	Dimensi	5090100mm (WHD)
	Pembungkusan	0.42Kg; 30pcs/20Kg/0.82CUFT
Nota	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation.
	4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.
	5. The length of set-up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time.