S-1000W series normal single switching power supply

WeHo professional 1000W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-1000-12	S-1000-24	S-1000-36	S-1000-48
Voltan output DC, arus	12V 0～80A	24V 0～42A	36V 0～28A	48V 0～21A
Gelombang dan bunyi bising	150mvp-p	180mVp-P	180mVp-P	240MVP-P
Kestabilan dawai masuk	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Memuatkan kestabilan	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Kecekapan	0.8	0.85	0.85	0.87
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	100~132VAC/200~264VAC by switch 254~370VDC 47～63Hz
Kesan semasa	Cold Start Current 45A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Perlindungan lain	Over current protection /Short-circuit protection
Persediaan, bangkit, tahan uptime	2000ms,50ms,20ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	291×132×68mm
Berat	2.65kg
Pembungkusan	37.5×31×25.5CM/6PCS/16kg