S-2400W series normal single switching power supply

WeHo professional 2400W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-2400-24	S-2400-36	S-2400-48	S-2400-60
Voltan output DC, arus	24V0～100A	36V0～67A	48V 0～50A	60V 0～40A
Gelombang dan bunyi bising	120mvp-p	200mvp-p	240MVP-P	480mVp-P
Kestabilan dawai masuk	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Memuatkan kestabilan	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Kecekapan	0.8	0.86	0.87	0.88
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	200～264VAC 47～63Hz
Kesan semasa	Cold Start Current 45A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Over voltage protection	115%～150%shut down O/P voltage,re-power on to recover
Persediaan, bangkit, tahan masa	2000ms,50ms,20ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	291×132×136mm
Berat	5.3kg
Pembungkusan	38×37.5×21CM/2PCS/11kg