SP-9000 Single Output Power Supply With PFC

SP-9000 is a 9KW single output chassis type AC to DC power supply.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

I -download Humiling ng isang quote

Paglalarawan

Buod

Single output: Power 9000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Mga tampok

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

General Specification

Modelo	SP-9000-24	SP-9000-30	SP-9000-36	SP-9000-48	SP-9000-60	SP-9000-110	SP-9000-220
DC voltage	24V	30V	36V	48V	60V	110V	220V
Rated current	337.5A	270A	225A	168.8A	135A	73.6A	36.8A
Kasalukuyang saklaw	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
Na-rate na Kapangyarihan	9000W
Ripple	500mV	500mV	500mV	600mV	600mV	1000mV	1500mV
Constant current optimum range	12-24V	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Rated voltage accuracy	±1.0%
Regulasyon ng Linya	±1.0%
Regulasyon sa Pag-load	±1.0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Saklaw ng dalas	45Hz-65Hz
Power Factor	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	0.9	0.9	0.915	0.92	0.92	0.925	0.93
AC Current	<56A
Leakage Current	<3.0mA/240VAC
Short Circuit	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recover after restarting.
Over current	The user can set the over-curent value to delay the oufout for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Over temperature	Shut down the output,automatically recover or restart after the temperature drops.
Output voltage adjustment	0-26.4V	0-33V	0-39.6V	0-52.8V	0-66V	0-121V	0-242V
Output constant current adjustment	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
485 Communications	MODBUS Communication Protocol
Isolated auxiliary	12V0.5A (Need customization)
Output remote switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Operating temperature	-20-+60℃
Operating humidity	-20-90%RH No condensation
Temperatura at halumigmig ng imbakan	-40-+85℃,10-95%RHNo condensation
Vibration resistance	110-500Hz,2G10 Min/cycle, X,Y,Z60 Min
Insulaion resistance	输入输出：100Mhms/500VDC/25°C/70%RH Input to Output:100Mhms/500VDC/25°C/70%RH
Paglaban sa presyon	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Size	432×179×242mm
Net weight	12.5 kg