Plastic shell 5V/12V/24V/48V dc dinrail power supply 100w

MDR-100 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at Email: [email protected]

I -download Humiling ng isang quote

Paglalarawan

Mga Detalye at Modelo

Modelo		MDR-100-12	MDR-100-15	MDR-100-24	MDR-100-48
Output	DC Boltahe	12V	15V	24V	48V
	Na-rate na Kasalukuyan	7.5A	6.7A	4A	2A
	Kasalukuyang Saklaw	0 ~ 7.5A	0 ~6.7A	0 -4A	0-2A
	Na-rate na Kapangyarihan	100W	100W	100W	100W
	Ripple at Ingay (max.)	80mVp-p	120mVp-p	150mVp-p	200mVp-p
	Volage ADJ Range	12 -13.2V	15-16.5V	24 – 26.4V	48 ~ 56V
	Pagpapahintulot sa Boltahe	±2.0%	±1.0%	±1.0%	±1.0%
	Regulasyon ng Linya	±1.0%	±1.0%	±1.0%	±1.0%
	Regulasyon sa Pag-load	±1.5%	±1.0%	±1.0%	±1.0%
	Setup, Rise Time Note.5	500ms, 30ms/230VAC 500ms, 30ms/115VAC sa buong load
	Hold Up Time (Typ.)	50ms/230VAC 20ms/115VAC sa buong load
Input	Saklaw ng Boltahe	85~264VAC 120~370VDC
	Saklaw ng Dalas	47 ~ 63Hz
	Kahusayan (Typ.)	78%	86%	88%	87%
	AC Current(Typ.)	1.8A/115VAC 1A/230VAC
	Inrush Current (Typ.)	Cold start: 30A/115VAC, 60A/230VAC
	Leakage Current	<1mA/240VAC
Proteksyon	Overload	105% – 150% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Overvoltage	6.25-7.25V	15.6 – 18V	31.2-36V	57.6 – 64.8V
		Uri ng proteksyon: I-shut down ang boltahe ng o/p, muling i-on para mabawi
Function	DC Signal	Relay contact rating (max.): 30V/1A resistive
Kapaligiran	Humidity sa Paggawa	20% ~ 90%RH non-condensing
	Temp, Halumigmig	-40°C ~ +85°C, 10% ~ 95%RH
	Temp Coefficient	±0.03%/°C (0 – 50°C)
	Panginginig ng boses	Component: 10 – 500Hz, 2G 10min./1 cycle, the period for 60min. each along X, Y, and Z axes; Mounting: Compliance to IEC60068-2-6
Kaligtasan at EMC	Mga Pamantayan sa Kaligtasan	UL508, UL60950-1, TUV EN60950-1 approved
	Makatiis sa Boltahe	l/P-0/P: 3KVAC l/P-FG: 2KVAC 0/P-FG: 0.5KVAC
	Paglaban sa Paghihiwalay	l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH
	EMC Emission	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	EMC Immunity	Compliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
Iba	MTBF	299.2K hrs min. MIL-HDBK-217F (25°C)
	Dimensyon	5090100mm (WHD)
	Pag-iimpake	0.42Kg; 30pcs/20Kg/0.82CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation.
	4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.
	5. The length of set-up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time.