| Modeli | MDR-60-5 | MDR-60-12 | MDR-60-24 | MDR-60-48 | |
| Çıktı | DC Gerilim | 5V | 12V | 24V | 48V |
| Nominal Akım | 10a | 5a | 2,5A | 1.25A | |
| Mevcut Aralık | 0 ~ 10A | 0 ~5A | 0 -2.5A | 0-1.25A | |
| Nominal Güç | 50W | 60W | 60W | 60W | |
| Dalgalanma ve Gürültü (maks.) | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | |
| Voltage ADJ Range | 5 -6V | 12-15V | 24 – 30V | 48 ~ 56V | |
| Gerilim Toleransı | ±2.0% | ±1,0% | ±1,0% | ±1,0% | |
| Hat Düzenleme | ±1,0% | ±1,0% | ±1,0% | ±1,0% | |
| Yük Düzenlemesi | ±1.5% | ±1,0% | ±1,0% | ±1,0% | |
| Setup, Rise Time Note.5 | 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
||||
| Hold Up Time (Typ.) | 50ms/230VAC 20ms/115VAC at full load |
||||
| Giriş | Gerilim Aralığı | 85~264VAC 120~370VDC |
|||
| Frekans Aralığı | 47~63Hz | ||||
| Verimlilik (Tip.) | 78% | 86% | 88% | 87% | |
| AC Current (Typ.) | 1.8A/115VAC 1A/230VAC |
||||
| Ani Akım (Tip.) | COLD START: 30A/115VAC 60A/230VAC |
||||
| Kaçak Akım | <1mA/240VAC | ||||
| Koruma | Aşırı yük | 105% ~ 150% rated output power | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
| Over-voltage | 6.25-7.25V | 15.6 – 18V | 31.2-36V | 57.6 – 64.8V | |
| Protection type: Shut down o/p voltage, re-power on to recover | |||||
| Function | DC Signal | Relay contact rating (max.): 30V/1A resistive | |||
| Çevre | Çalışma Nemi | 20% ~ 90%RH non-condensing | |||
| Storage Temp Humidity | -40°C ~ +85°C, 10% ~ 95%RH | ||||
| Temp Coefficient | ±0.03%/°C (0 – 50°C) | ||||
| Titreşim | Component: 10 – 500Hz, 2G 10min./1 cycle, the period for 60min. each along X, Y, and Z axes; Mounting: Compliance to IEC60068-2-6 | ||||
| Güvenlik ve EMC | Güvenlik Standartları | UL508, UL60950-1, TUV EN60950-1 approved | |||
| Dayanım Gerilimi | l/P-0/P: 3KVAC l/P-FG:2KVAC 0/P-FG: 0.5KVAC |
||||
| İzolasyon Direnci | l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH | ||||
| EMC Emission | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 | ||||
| EMC Immunity | Compliance to EN6100(M-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | ||||
| Diğerleri | MTBF | 299.2K hrs min. MIL-HDBK-217F (25°C) | |||
| Boyut | 40*90*100mm (W*H*D) | ||||
| Ambalaj | 0.33Kg; 60pcs/20Kg/0.82CUFT | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 of & 47uf parallel capacitor. | |||||
| 3. Tolerance: includes set up tolerance, line regulation, and load regulation. | |||||
| 4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. | |||||
| 5. The length of set-up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the setup time. | |||||
Wholesale 60W single output DIN Rail power power supply
MDR-60 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at E-posta: [email protected]
- Tanım
Advantage Material: For all switching Power Supplies, Faithful Brand adopts pure copper materials for Power inductors & Main transformers & IC Transformers.
And we make transformers and power inductors with pure copper all by ourselves, in order to make sure the materials use pure copper to keep the high efficiency of power supply working performance and reduce the cost of power supply.
The product’s operating temperature range is: -10°C ~ +50°C
Global wide input volatge range 100V to 264V AC
This product is small and easy to install, which is space and cost-efficient.
The product can be cooled by convection of natural air.
LED Indicator lamp for power on
Bu ürün 24 ay garanti kapsamındadır.
Save space and cost
İLGİLİ ÜRÜNLER
İşletmeniz için en iyi Güç Kaynağı ürünleri nelerdir?
WEHO kalitesindeki güç kaynağı ürünleriyle işinizi güçlendirin.
Bir Uzmana Sorun