SP-9000 Single Output Power Supply With PFC

SP-9000 is a 9KW single output chassis type AC to DC power supply.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Tải xuống Yêu cầu báo giá

Sự miêu tả

Bản tóm tắt

Single output: Power 9000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Đặc trưng

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Đặc điểm chung

Người mẫu	SP-9000-24	SP-9000-30	SP-9000-36	SP-9000-48	SP-9000-60	SP-9000-110	SP-9000-220
điện áp một chiều	24V	30V	36V	48V	60V	110V	220V
Đánh giá hiện tại	337.5A	270A	225A	168.8A	135A	73.6A	36.8A
Phạm vi hiện tại	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
Công suất định mức	9000W
Ripple	500mV	500mV	500mV	600mV	600mV	1000mV	1500mV
Constant current optimum range	12-24V	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Rated voltage accuracy	±1.0%
Quy định dòng	±1.0%
Quy định tải	±1.0%
Thời gian khởi động và tăng	1500mS,700mS/230VAC (Fully loaded)
Dải điện áp	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Dải tần số	45Hz-65Hz
Hệ số công suất	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	0.9	0.9	0.915	0.92	0.92	0.925	0.93
dòng điện xoay chiều	<56A
Dòng điện rò rỉ	<3.0mA/240VAC
Ngắn mạch	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recover after restarting.
Over current	The user can set the over-curent value to delay the oufout for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Quá nhiệt độ	Shut down the output,automatically recover or restart after the temperature drops.
Output voltage adjustment	0-26.4V	0-33V	0-39,6V	0-52.8V	0-66V	0-121V	0-242V
Output constant current adjustment	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
485 Communications	MODBUS Communication Protocol
Isolated auxiliary	12V0.5A (Need customization)
Output remote switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Nhiệt độ hoạt động	-20-+60oC
Độ ẩm hoạt động	-20-90%RH No condensation
Nhiệt độ và độ ẩm bảo quản	-40-+85℃,10-95%RHNo condensation
Chống rung	110-500Hz,2G10 Min/cycle, X,Y,Z60 Min
Insulaion resistance	输入输出：100Mhms/500VDC/25°C/70%RH Input to Output:100Mhms/500VDC/25°C/70%RH
Chịu áp lực	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Size	432×179×242mm
Net weight	12.5 kg