SP-12000 : 12000W AC to DC Adjustable Switching Power Supply With PFC

The WEHO SP-12000 is an industrial behemoth engineered to deliver an unyielding 12,000W of precision single-output DC power. Designed with adaptive input voltage sensing—providing 50% load capacity on 95-190VAC and full 100% capacity on 195-265VAC—it offers a versatile selection of output configurations ranging from 30V up to 220V. Built for the most demanding automated environments, it operates with exceptional energy conversion efficiency up to 93%. This heavy-duty 22kg module (455 x 345 x 251 mm) is fully equipped with RS485 Modbus telemetry, linear voltage and constant current adjustability, an isolated 12V/0.5A auxiliary supply, and dry-contact alarm interfaces for seamless system integration.

Herunterladen Fordern Sie ein Angebot an

Beschreibung

Zusammenfassung

Single output: Power 12000W

Eingangsspannung: 95–190 VAC (Ausgangsstrom 50%) 195–265 VAC (Ausgangsstrom 100%)

Allgemeine Spezifikation

Modell	SP-12000-30	SP-12000-36	SP-12000-48	SP-12000-60	SP-12000-110	SP-12000-220
Gleichspannung	30V	36V	48V	60V	110V	220V
Nennstrom	320A	266.7A	200A	160A	87.3A	43.6A
Aktueller Bereich	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
Nennleistung	12000W
Welligkeit	500 mV	500 mV	600 mV	600 mV	1000mV	1500 mV
Optimaler Konstantstrombereich	15-30V	18-36V	24-48V	30-60V	55-110V	110–220 V
Genauigkeit der Nennspannung	±1,0%
Linienregulierung	±1,0%
Lastregulierung	±1,0%
Start- und Anstiegszeit	1500 mS, 700 mS/230 VAC (voll beladen)
Spannungsbereich	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Frequenzbereich	45Hz-65Hz
Leistungsfaktor	PF≥0,99/230VAC (voll beladen)
Effizienz (MAX)	91%	91.5%	92%	92%	92.5%	93%
Wechselstrom	<110A
Leckstrom	<3,0 mA/240 VAC
Kurzschluss	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recovers after restarting.
Überstrom	The user can set the over-current value to delay the oufput for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Übertemperatur	Schalten Sie den Ausgang aus, stellen Sie ihn automatisch wieder her oder starten Sie ihn neu, nachdem die Temperatur gesunken ist.
Einstellung der Ausgangsspannung	0-33V	0-39,6 V	0-52,8 V	0-66V	0-121V	0-242V
Einstellung des Ausgangskonstantenstroms	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
485 Kommunikation	MODBUS-Kommunikationsprotokoll
Isolated auxiliary	12V0,5A (Anpassung erforderlich)
Output remote switch	Standardmäßiges Einschalten, hohes Ausschalten (5V-12V) (Anpassung erforderlich)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Betriebstemperatur	-20-+60℃
工作湿度 Operating humidity	-20-90%RH No condensation
Lagertemperatur und Luftfeuchtigkeit	-40-+85℃,10-95%RHNo condensation
Vibrationsfestigkeit	10-500Hz,2G10 Min/cycle,X、Y、Z60Min
Insulation resistance	Eingang zu Ausgang: 100 Mhms/500 VDC/25 °C/70%RH
Druckfestigkeit	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Größe	455×345×251mm
Nettogewicht	22 kg

Gesamtabmessungen (mm)

SP-12000 : 12000W AC to DC Adjustable Switching Power Supply With PFC title=

Key Advantages & Application Scenarios

Key Advantages

Programmable Shock Resistance: Designed to handle extreme electrical stress, it features a user-defined 5-second over-current delay. This uniquely allows the system to effortlessly absorb massive startup surge currents from heavy inductive equipment without triggering premature, disruptive shutdowns.

Full-Range Precision Tuning: Breaks free from fixed-output limitations by empowering operators to smoothly adjust both voltage and constant current from near-zero up to their maximum ratings (e.g., 0-242V tuning on the 220V model), providing surgical precision for highly sensitive loads.

Centralized Digital Command: The native RS485 Modbus protocol, combined with customizable dry-contact alarm signals and high-level remote switching, allows facility engineers to monitor, control, and automate power scaling directly from a central SCADA or PLC system.

Application Scenarios

Heavy Industrial Machinery Testing: Delivers the massive, uninterrupted high-amperage power (up to 320A on lower voltage models) necessary for testing heavy-duty DC motors, large-scale CNC machining centers, and automated robotic arms.

Commercial Energy Storage & EV Infrastructure: The exceptionally stable and highly adjustable constant current output makes it the perfect primary power backbone for grid-scale battery formation facilities and large electric vehicle charging hubs.

Electrochemical & Surface Treatment: Supplies the unyielding 12kW continuous power essential for large-scale industrial electroplating, anodizing lines, and centralized chemical water purification systems requiring prolonged, heavy-load operation.