| Modell | Ausgabe | Tolerance Voltage | Ripple and Noise | Effizienz |
| MDR-40-5 | 5V, 0-6.0A | ± 2% | 80mvp-p | 78% |
| NDR-40-12 | 12V, 0-3.3A | ± 1% | 120mvp-p | 86% |
| MDR-40-15 | 15V, 0-2.66A | ± 1% | 120mvp-p | 88% |
| MDR-40-24 | 24V, 0-1.7A | ± 1% | 200mvp-p | 88% |
| 1. Universal AC input/ Full range | ||||
| 2. Installed on DIN rail TS35/ 7.5 OR 15 | ||||
| 3. Protection: short circuit/ over-load/ over-voltage | ||||
| 4. No load power consumption <0.75W | ||||
| 5. LED indicator for power on | ||||
| 6. DC OK signal output (20W) | ||||
| 7. DC OK relay contact (40W&60W) | ||||
| 8. Cooling by free air condition | ||||
| 9. 100% full load burn-in | ||||
| 10. 2 years warranty | ||||
| Specification: | ||||
| 1. AC input voltage range: 85-264VAC; 120-370VDC | ||||
| 2. AC input current: cold start, 30A at 115VAC, 60A at 230VAC | ||||
| 3. DC adjustment range: 0±20% rated output voltage | ||||
| 4. Over-load protection: 105-150% constant current limiting, auto-recovery | ||||
| 5. Over-voltage protection: 125%-150% rated output voltage | ||||
| 6. Setup, rise, hold up time: 500ms,30ms,50ms AT FULL LOAD AND 230VAC | ||||
| 7. Withstand voltage: I/P-O/P:3KVAC, I/P-FG: 1.5KVAC, 1minute | ||||
| 8. Working temperature: -20-60°C@100%, 70°C@50% load | ||||
| 9. DC OK signal: relay contact | ||||
| 10. EMC standards: EN55022 class B, EN61000-3-2,-3, EN50204, EN61000-4-2,3,4,5,6,8,11, EN61204-3, (EN61000-6-2 heavy industry level also for 40W&60W) | ||||
| 11. Connection: I/P: 3 poles, O/P: 3poles screw DIN terminal | ||||
| 12. Dimension (L*W*H): 40*90*100 mm | ||||
| Please Note: | ||||
| 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity. | ||||
| 2. Error, include the setting error, line stability and load stability. | ||||
| 3. Wave test: adopting “A12” double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting. | ||||
| 4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage. | ||||
| 5. Load stability test: the load is from 0% to 100%, others 60%. | ||||
| 6. Total stability test: the load is from 0% to 100%, others 60%. | ||||
| 7. C2, 3, 6 must be knocked down. | ||||
WEHO 40W single output DIN Rail switching power supply
MDR-40 is a slim line DIN rail Class I switching power supply.
Entworfen mit einem vollständig isolierten Kunststoffgehäuse, um Benutzerkontakt und die Gefahr eines Stromschlags zu verhindern. Mit einem Wirkungsgrad von bis zu 88% kann diese Serie nur durch freie Luftkonvektion bis zu 60 °C gekühlt werden, was die Zuverlässigkeit und Lebensdauer des Netzteils erheblich erhöht. Zu den weiteren Standardmerkmalen gehören der niedrige Leerlaufstromverbrauch, um Energie zu sparen, Kurzschluss-, Überlast- und Überspannungsschutz sowie ein DC-OK-Relaiskontakt mit LED-Anzeige zur Überwachung des Netzteilstatus. Falls vorhandenWenn Sie Fragen haben, zögern Sie bitte nicht, uns unter E-Mail zu kontaktieren: [email protected]
- Beschreibung
we make transformers and power inductors by pure coppers all by ourselves,
Weho hat 150.000 Sätze häufig verwendeter Modelle auf Lager und gewährleistet so eine schnelle Lieferung.
We are a power supply manufacturer with 12 years of experience.
Global wide input volatge range 100V to 264V AC
This product has a minimum order quantity of 100 pieces and can be customized with labels.
This product is small and easy to install, which is space and cost-efficient.
The product can be cooled by convection of natural air.
Save space and cost
VERWANDTE PRODUKTE
Was sind die besten Stromversorgungsprodukte für Ihr Unternehmen?
Steigern Sie Ihr Geschäft mit den hochwertigen Stromversorgungsprodukten von WEHO.
Fragen Sie einen Experten