| MODEL | MDR-20-5 | MDR-20-12 | MDR-20-15 | MDR-20-24 | |
| DC VOLTAGE | 5V | 12V | 15V | 24V | |
| RATED CURRENT | 3A | 1.67A | 1.34A | 1A | |
| CURRENT RANGE | 0 ~ 3A | 0 ~ 1.67A | 0 ~ 1.34A | 0 ~ 1A | |
| RATED POWER | 15W | 20W | 20W | 24W | |
| RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |
| OUTPUT | VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V |
| VOLTAGE TOLERANCE Note.3 | ±2,0% | ±1,0% | ± 1.0% | ± 1.0% | |
| LINE REGULATION | ±1,0% | ±1,0% | ±1,0% | ±1,0% | |
| LOAD REGULATION | ±1,0% | ±1,0% | ± 1.0% | ± 1.0% | |
| SETUP, RISE TIME Note.5 | 500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load | ||||
| HOLD UPTIME (Typ.) | 50ms/230VAC 20ms/115VAC at full load | ||||
| VOLTAGE RANGE | 85 ~ 264 VAC 120 ~ 370 VDC | ||||
| FREQUENCY RANGE | 47 ~63Hz | ||||
| INPUT | EFFICIENCY (Typ.) | 76% | 80% | 81% | 84% |
| AC CURRENT (Typ.) | 0.55A/115VAC 0.35A/230VAC | ||||
| INRUSH CURRENT (Typ.) | COLD START 20A/115VAC,40A/230VAC | ||||
| LEAKAGE CURRENT | <1mA/240VAC | ||||
| OVERLOAD | 105 ~ 160% Nennausgangsleistung | ||||
| PROTECTION | Schutzart: Konstantstrombegrenzung, automatische Wiederherstellung nach Beseitigung des Fehlerzustands | ||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | |
| Protection type: Shut down o/p voltage, re-power on to recover | |||||
| FUNCTION | DC OK ACTIVE SIGNAL (max.) | 3.75 ~ 6V / 50mA | 9 ~ 13.5V / 40mA | 11.5 ~ 16.5V / 40mA | 18 ~ 27V / 20mA |
| WORKING TEMP. | -20 ~ +70C (Refer to “Derating Curve”) | ||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
| ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +85C, 10 ~ 95% RH | |||
| TEMP. COEFFICIENT | ±0.03%/C (0 ~ 50C) | ||||
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||||
| SAFETY STANDARDS | UL508, TUV EN60950-1 approved | ||||
| SAFETY & | WITHSTAND VOLTAGE | I/P-O/P: 3KVAC I/P-FG: 2KVAC O/P-FG: 0.5KVAC | |||
| EMC | ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH | |||
| EMC EMISSION | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 | ||||
| EMC IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-1, EN61204-3, light industry level, criteria A | ||||
| MTBF | 236.9K hrs min. MIL-HDBK-217F (25C) | ||||
| OTHERS | DIMENSION | 22.5*90*100mm (W*H*D) | |||
| PACKING | 0.19Kg; 72pcs/14.7Kg/0.91CUFT | ||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | ||||
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. | |||||
| 3.Tolerance : includes set up tolerance, line regulation and load regulation. | |||||
| 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||||
| 5.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. | |||||
100% Guarantee MDR series 20w 5V/12v/24V switching power supply
MDR-20 is a slim line DIN rail Class I switching power supply.
Entworfen mit einem vollständig isolierten Kunststoffgehäuse, um Benutzerkontakt und die Gefahr eines Stromschlags zu verhindern. Mit einem Wirkungsgrad von bis zu 88% kann diese Serie nur durch freie Luftkonvektion bis zu 60 °C gekühlt werden, was die Zuverlässigkeit und Lebensdauer des Netzteils erheblich erhöht. Zu den weiteren Standardmerkmalen gehören der niedrige Leerlaufstromverbrauch, um Energie zu sparen, Kurzschluss-, Überlast- und Überspannungsschutz sowie ein DC-OK-Relaiskontakt mit LED-Anzeige zur Überwachung des Netzteilstatus. Falls vorhandenWenn Sie Fragen haben, zögern Sie bitte nicht, uns unter E-Mail zu kontaktieren: [email protected]
- Beschreibung
May be based on customer demand of custom-made related size and function driver module
We choose components for the best compatibility and logical configuration
This product has an integrated design that minimises temperature rise and calorific value.
The product is highly stable, the workmanship is steady, the output voltage is consistent, and there is no drift.
Global wide input volatge range 100V to 264V AC
This product is small and easy to install, which is space and cost-efficient.
The product can be cooled by convection of natural air.
Save space and cost
VERWANDTE PRODUKTE
Was sind die besten Stromversorgungsprodukte für Ihr Unternehmen?
Steigern Sie Ihr Geschäft mit den hochwertigen Stromversorgungsprodukten von WEHO.
Fragen Sie einen Experten
