SP-12000 Single Output Power Supply With PFC

SP-12000 High power switching power supply.Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.
This product has a large smart display screen.There are voltage display, current display, electricity consumption display and power display.Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Descargar Solicitar una cotización

Descripción

Resumen

Single output: Power 12000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Características

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Especificaciones generales

Modelo	SP-12000-30	SP-12000-36	SP-12000-48	SP-12000-60	SP-12000-110	SP-12000-220
DC voltage	30V	36V	48V	60V	110V	220V
Corriente nominal	320A	266.7A	200A	160A	87.3A	43.6A
Rango actual	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
Potencia nominal	12000W
Onda	500mV	500mV	600mV	600mV	1000mV	1500mV
Rango óptimo de corriente constante	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Rated voltage accuracy	±1.0%
Regulación de línea	±1.0%
Regulación de carga	±1.0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Rango de frecuencia	45Hz-65Hz
Factor de potencia	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	91%	91.5%	92%	92%	92.5%	93%
Corriente alterna	<110A
Corriente de fuga	<3,0 mA/240 VCA
Cortocircuito	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recovers after restarting.
Over current	The user can set the over-current value to delay the oufput for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Sobre temperatura	Shut down the output,automatically recover or restart after the temperature drops.
Ajuste del voltaje de salida	0-33V	0-39,6V	0-52,8 V	0-66V	0-121V	0-242V
Ajuste de corriente constante de salida	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
485 Communications	MODBUS Communication Protocol
Isolated auxiliary	12V0.5A (Need customization)
Output remote switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Temperatura de funcionamiento	-20-+60℃
工作湿度 Humedad de funcionamiento	-20-90%RH No condensation
Storage temperature and humidity	-40-+85℃,10-95%RHNo condensation
Resistencia a las vibraciones	10-500Hz,2G10 Min/cycle,X、Y、Z60Min
Resistencia a aislamiento	Input to Output:100Mhms/500VDC/25°C/70%RH
Resistencia a la presión	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Size	455×345×251mm
Peso neto	22 kg