SP-12000 Single Output Power Supply With PFC

SP-12000 High power switching power supply.Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.
This product has a large smart display screen.There are voltage display, current display, electricity consumption display and power display.Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Pobierać Poproś o wycenę

Opis

Streszczenie

Single output: Power 12000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Cechy

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Specyfikacja ogólna

Model	SP-12000-30	SP-12000-36	SP-12000-48	SP-12000-60	SP-12000-110	SP-12000-220
Napięcie stałe	30 V	36 V	48 V	60V	110 V	220 V
Prąd znamionowy	320A	266.7A	200A	160A	87.3A	43.6A
Aktualny zakres	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
Moc znamionowa	12000W
Marszczyć	500mV	500mV	600mV	600mV	1000mV	1500mV
Constant current optimum range	15-30 V	18-36 V	24-48 V	30-60V	55-110 V	110-220 V
Rated voltage accuracy	±1,0%
Regulacja linii	±1,0%
Regulacja obciążenia	±1,0%
Czas uruchamiania i narastania	1500mS,700mS/230VAC (Fully loaded)
Zakres napięcia	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Zakres częstotliwości	45 Hz-65 Hz
Współczynnik mocy	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	91%	91.5%	92%	92%	92.5%	93%
Prąd przemienny	<110A
Prąd upływowy	<3,0mA/240VAC
Zwarcie	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recovers after restarting.
Over current	The user can set the over-current value to delay the oufput for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Nadmierna temperatura	Shut down the output,automatically recover or restart after the temperature drops.
Output voltage adjustment	0-33 V	0-39,6 V	0-52,8 V	0-66V	0-121 V	0-242 V
Output constant current adjustment	0-320A	0-266.7A	0-200A	0-160A	0-87.3A	0-43.6A
485 Communications	MODBUS Communication Protocol
Isolated auxiliary	12V0.5A (Need customization)
Output remote switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Temperatura robocza	-20-+60 ℃
工作湿度 Wilgotność robocza	-20-90%RH No condensation
Temperatura i wilgotność przechowywania	-40-+85℃,10-95%RHNo condensation
Odporność na wibracje	10-500Hz,2G10 Min/cycle,X、Y、Z60Min
Insulation resistance	Input to Output:100Mhms/500VDC/25°C/70%RH
Odporność na ciśnienie	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Size	455×345×251mm
Net weight	22 kg