SP-9000 Single Output Power Supply With PFC

SP-9000 is a 9KW single output chassis type AC to DC power supply.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Descargar Solicitar una cotización

Descripción

Resumen

Single output: Power 9000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Características

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Especificaciones generales

Modelo	SP-9000-24	SP-9000-30	SP-9000-36	SP-9000-48	SP-9000-60	SP-9000-110	SP-9000-220
DC voltage	24V	30V	36V	48V	60V	110V	220V
Corriente nominal	337.5A	270A	225A	168.8A	135A	73.6A	36.8A
Rango actual	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
Potencia nominal	9000W
Onda	500mV	500mV	500mV	600mV	600mV	1000mV	1500mV
Rango óptimo de corriente constante	12-24V	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Rated voltage accuracy	±1.0%
Regulación de línea	±1.0%
Regulación de carga	±1.0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Rango de frecuencia	45Hz-65Hz
Factor de potencia	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	0.9	0.9	0.915	0.92	0.92	0.925	0.93
Corriente alterna	<56A
Corriente de fuga	<3,0 mA/240 VCA
Cortocircuito	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recover after restarting.
Over current	The user can set the over-curent value to delay the oufout for 5 seconds and then shut down the output,and then resume after restarting.
Overpressure	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Sobre temperatura	Shut down the output,automatically recover or restart after the temperature drops.
Ajuste del voltaje de salida	0-26,4 V	0-33V	0-39,6V	0-52,8 V	0-66V	0-121V	0-242V
Ajuste de corriente constante de salida	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
485 Communications	MODBUS Communication Protocol
Isolated auxiliary	12V0.5A (Need customization)
Output remote switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm signal output	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Temperatura de funcionamiento	-20-+60℃
Humedad de funcionamiento	-20-90%RH No condensation
Storage temperature and humidity	-40-+85℃,10-95%RHNo condensation
Resistencia a las vibraciones	110-500Hz,2G10 Min/cycle, X,Y,Z60 Min
Insulaion resistance	输入输出：100Mhms/500VDC/25°C/70%RH Input to Output:100Mhms/500VDC/25°C/70%RH
Resistencia a la presión	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Size	432×179×242mm
Peso neto	12.5 kg