Alimentatore switching a tensione costante 800w 48V 17A DC 48 volt

WeHo professional 800W Switching SCN series Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity. Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E-mail: [email protected]

Scaricamento Richiedi un preventivo

Descrizione

Specifiche e modello

Modello		SCN-800-12	SCN-800-15	SCN-800-24	SCN-800-48
Produzione	Tensione CC	12V	15 V	24 V	48 V
	Tolleranza di tensione	±1%	±1%	±1%	±1%
	Corrente nominale	66A	54A	33A	16.6A
	Intervallo corrente	0-66A	0-54A	0-33A	0-16.6A
	Potenza nominale	800W	800W	800W	800W
	Ripple & Noise	150mVp-p	150mVp-p	240mVp	480mVp
	DC Adjustment Range	±5%; Can adjust from 40%~100% output voltage by external control 2-5V
	Impostazione, salita, attesa	800ms, 50ms, 16ms at full load
Ingresso	Intervallo di tensione	90~130VAC / 180~260 VAC47~63 Hz; selected by switch260~370VDC
	Corrente CA	13A/115 VAC 8.0A/ 230 VAC
	Efficienza	80%	81%	85%	87%
	Corrente di spunto	60A/230V
	Corrente di dispersione	3.5 mA/240VAC
Protezione	Over Load	110%~135%
		Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover
	Sovratensione	110%~135%
		Protection type: Shut down o/p voltage, re-power on to recover
	Over-Temp	TSW1(Power transistor) When temp. >100 °C, shut down o/p voltage, re-power on to recover
Ambiente	Working Temp. Humidity	-10°C ~ +65°C, 20%~90%RH
	Storage Temp. Humidity	-20°C ~ +85°C, 10%~95%RH
	Vibrazione	10~200Hz, 2G 10min./1cycle, the period for 60min, each along X, Y, and Z axes
Sicurezza	Resistere alla tensione	I/P-O/P, I/P-FG: 1500VAC
	Resistenza di isolamento	I/P-O/P, I/P-FG, >100M Ohms / 500VDC
Standard	Safety Standard	Design refer to UL1950,CSA22.2,IEC60950
	Norma EMC	Design refers to FCC Part 15 Class A
Altri	Peso	2.3Kg;
	Imballaggio	6pcs/ ctn
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation.
	4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives.