SP-15000 Single Output Power Supply With PFC

SP-15000 is a 15KW single output chassis type AC to DC power supply. The entire series input voltage range is 95-265VAC, and can provide DC output for most industrial needs.
Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Richiedi un preventivo

Descrizione

Caratteristiche

1、Intervallo di tensione in ingresso: 95-265VAC
2、Tipo di protezione: cortocircuito/sovracorrente/sovratensione/sovratemperatura
3、Fattore di potenza PF≧0,99
4、Efficienza operativa fino a 93%
Controllo della comunicazione 5、485

Parametri tecnici

Modello		SP-15000-24	SP-15000-36	SP-15000-48	SP-15000-60	SP-15000-110	SP-15000-220
OUTPUT	Tensione CC	24 V	36V	48 V	60 V	110 V	220 V
	Corrente nominale	625A	416A	312A	250A	136A	68A
	Current range	0 – 625A	0 – 416A	0 – 312A	0 – 250A	0 – 136A	0 – 68A
	Rated power	15000W
	Ripple & Roise	500mV	500mV	600mV	600mV	1000mV	1500mV
	Constant current range	12 – 24 V	18 – 36 V	24 – 48 V	30 – 60 V	55 – 110V	110 – 220 V
	Tolleranza di tensione	±1,0%
	Line regulation	±1,0%
	Load regulation	±1,0%
	Setup risetime	1500mS ，700mS/ 230VAC( Full load）
INPUT	Intervallo di tensione	95- 190 VAC(output current 50%) , 195- 265 VAC(output current 10 0%)
	Gamma di frequenza	45Hz – 65Hz
	Fattore di potenza	PF≧0 .99/ 230VAC( Full load)
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	Corrente CA	＜110A
	Leakage current	＜3 .0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	The user can set a delay of 5 seconds after the current value is turned off, and the output can be restored after restart
	Over voltage	The user can set the overvoltage value to turn off the output voltage, and resume after restart
	Sovratemperatura	Turn off the output and automatically recover or restart after the temperature drops
FUNCTION	Regolazione della tensione di uscita	0 – 26.4V	0 – 39,6 V	0 – 52.8V	0 – 66 V	0 – 121V	0 – 242 V
	Regolazione della corrente costante in uscita	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81,8 A
	485 communication	MODBUS Communication protocol
	Isolating auxiliary power supply	12V 0.5A ( Need to be customized)
	Output remote control switch	Default power on, high power off（5V-12V） ( Need to be customized)
	Alarm output	Power normal signal ( Dry contact ≦ 36 V , 0 . 1A )( Need to be customized)
ENVIRONMENT	Working TEMP.	-20 – +60℃
	Working humidity	-20 – 90% RHnon-condensing
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH non-condensing
	Vibrazione	10 – 500Hz, 2G 10mins/T, X 、Y 、Zaxis 60 minutes each
SAFETY& EMC	Resistenza di isolamento	Input-output: 100 Mhms/500 VDC/ 25 ℃/70% RH
SAFETY& EMC	Resistere alla tensione	I/ P-O/ P : 2KVAC I/ P- FG:2KVAC O/ P- FG:0 . 5KVAC
OTHERS	Dimensione	455 345 251mm（LW H）
OTHERS	Peso netto	22 KG
Osservazione	1、All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0 . 1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.