블로그

Adding an LC Output Filter to an SMPS: Check Ringing, Sensing and Load Steps

Review an SMPS output LC filter with a resonance calculation, sensing checks and a before-and-after test matrix for ripple, startup

How Security Power Supplies Keep Access Control Systems Running During Power Outages

This article takes the working logic of the safe power supply as the research object, sorts out the hardware composition,

Adjustable AC-DC Power Supplies for Electroplating & Anodizing Lines

A power supply is usually used for several years, and its reliability in these years directly determines the reputation and

Constant Current Short-Circuit Protection: A Must-Have in High-Power Adjustable Supplies

A high-power adjustable power supply is different from a regular voltage source. It not only needs to deliver electrical energy,

Capacitive Load Startup: Check Charging Current Before Choosing a Power Supply

A modest running load can still prevent a DC rail from starting. Calculate the capacitor charging demand, include the load

Power Supply Reverse Current: Define Where Returned Energy Goes

A source that delivers a load current is not automatically able to accept current coming back. Define the power path

Standby Power Consumption in OEM Equipment: Build a State-Based AC Energy Budget

A power supply’s no-load input figure is not the standby consumption of a complete machine. Define the measurement boundary and

Line Regulation vs Load Regulation: Compare Power Supplies on the Same Basis

Separate input-driven and load-driven steady-state changes, normalize the units, and use a nine-point matrix to expose an interaction that two

Power Supply Switching Frequency: Review the Interface to Sensitive Equipment

A nominal switching frequency does not predict equipment compatibility. Map its operating range to sampling clocks and protected signal bands,

Common Mode Current in Isolated DC-DC Converters: Review the Capacitive Path

An isolation barrier interrupts a conductive path but still has parasitic capacitance. Use edge-current calculations and a controlled connection matrix

Hipot Test Records for OEM Power Supplies: What Buyers Should Verify

A hipot pass becomes useful procurement evidence when it identifies the exact assembly, insulation path, approved test program, and result.

EFT Test Planning for Power Supplies: Ports, Recovery, and System Evidence

A power supply surviving an EFT test does not show that the complete machine kept working. Define the tested ports,

당사 제품이나 프로세스에 대한 추가 정보가 필요하십니까?

모든 제품 카테고리