Blog

imageye imgi 6 dekor

Electronic Loads for Power Supply Testing: Choose CC, CR, CP or CV Mode

Match the load control law to the real device, then check voltage, current, power and dynamic limits before accepting a

Power Supply Short-Circuit Testing: Define the Fault and Recovery Record

Specify the fault and record its actual exposure, supply response and equipment recovery before assigning a pass result.

Programmable AC Source vs AC-DC Power Supply: Choose the Right Input-Test Equipment

Assign the source, DUT and output-load roles, then map the required input stimulus to documented test-equipment capabilities.

DC-DC Soft Start: Specify the Ramp and Upstream Current

Turn a soft-start feature into a defined ramp, input-current question and startup qualification matrix for the complete assembly.

DC-DC Remote On/Off: Specify the Control Interface Before Wiring

Define the exact control interface and verify its state through reset and power sequencing before approving a converter connection.

DC-DC Output Capacitors: Verify the Allowed Range and ESR

Check effective capacitance, ESR, layout and test conditions before adding or replacing output capacitors on a DC-DC converter.

Synchronous vs Non-Synchronous Buck Converters: What OEMs Should Verify

Compare buck-converter rectification, matched losses, light-load behavior and terminal current limits before approving a module or substitute.

Bidirectional DC-DC Converter vs a One-Way Supply: Map the Required Power Flow

Build a two-port qualification matrix for forward transfer, reverse transfer, direction changes and receiver limits before specifying a DC-DC converter.

How Security Power Supplies Keep Access Control Systems Running During Power Outages

This article takes the working logic of the safe power supply as the research object, sorts out the hardware composition,

Adjustable AC-DC Power Supplies for Electroplating & Anodizing Lines

A power supply is usually used for several years, and its reliability in these years directly determines the reputation and

Constant Current Short-Circuit Protection: A Must-Have in High-Power Adjustable Supplies

A high-power adjustable power supply is different from a regular voltage source. It not only needs to deliver electrical energy,

Capacitive Load Startup: Check Charging Current Before Choosing a Power Supply

A modest running load can still prevent a DC rail from starting. Calculate the capacitor charging demand, include the load