SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Supports 90-270VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Ζητήστε μια προσφορά

Περιγραφή

Χαρακτηριστικά

1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control

SP-18000 Single Output Power Supply With PFC title=

Technical Parameters

Μοντέλο		SP-18000-24	SP-18000-36	SP-18000-48	SP-18000-60	SP-18000-110	SP-18000-220
OUTPUT	DC voltage	24V	36V	48V	60V	110V	220V
	Rated current	740A	500A	375A	300A	163.6A	81.8A
	Current range	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	Rated power	18000W
	Ripple & Roise	500mV	500mV	600mV	600mV	1000mV	1500mV
	Constant current range	12 – 24V	18 – 36V	24 – 48V	30 – 60V	55 – 110V	110 – 220V
	Voltage tolerance	± 1.0%
	Line regulation	± 1.0%
	Load regulation	± 1.0%
	Setup risetime	1500mS，700mS/230VAC
INPUT	Voltage range	95-190VAC,195-265VAC
	Frequency range	45Hz – 65Hz
	Power factor	PF≥0.99/230VAC
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	AC Current	＜110A
	Leakage current	＜3.0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
	Over voltage	Users can set the overvoltage value to shut down the output voltage, and restore after restart
	Over temperature	Shut down the output, automatically recover or restart after the temperature drops
Function	Output voltage adjustment	0 – 26.4V	0 – 39.6V	0 – 52.8V	0 – 66V	0 – 121V	0 – 242V
	Output constant current adjustment	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	485 communication	MODBUS Communication Protocol
	Isolating auxiliary power supply	12V 0.5A (Need customization)
	Output remote control switch	Default power on, high level power off （5V-12V）(Need customization)
	Alarm output	Power Good Signal (Dry Contact≦36V,0.1A)(Need customization)
ENVIRONMENT	Working TEMP.	-20 – +60℃
	Working humidity	-20 – 90% RH No condensation
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH No condensation
	Vibration	10 – 500Hz, 2G 10 Min/Cycle, X、Y、Z 60 Min
SAFETY&EMC	Αντοχή στην απομόνωση	Input to Output:100Mhms/500VDC/25℃/70%RH
SAFETY&EMC	Αντοχή στην τάση	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Other	Διάσταση	455345251mm（LWH）
Other	Net weight	22 KG
Remark	1、All parameters NOT specially mentioned are measured at 23 0 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.