SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Supports 90-270VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Запросить цитату

Описание

Функции

1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control

Технические параметры

Модель		SP-18000-24	SP-18000 - 36	SP-18000 - 48	SP-18000 - 60	SP-18000 - 110	SP-18000 - 220
OUTPUT	Напряжение постоянного тока	24В	36В	48В	60В	110 В	220В
	Рейтинг тока	740A	500A	375A	300А	163.6A	81.8A
	Текущий диапазон	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	Рейтинг власти	18000W
	Ripple & Roise	500мВ	500мВ	600мВ	600мВ	1000 мВ	1500mv
	Диапазон постоянного тока	12 – 24V	18 – 36V	24 – 48V	30 – 60V	55 – 110V	110 – 220V
	Допуск по напряжению	± 1,0%
	Регулирование линии	± 1,0%
	Load regulation	± 1,0%
	Setup risetime	1500mS，700mS/230VAC
INPUT	Диапазон напряжения	95-190VAC,195-265VAC
	Диапазон частот	45Hz – 65Hz
	Коэффициент мощности	PF≥0.99/230VAC
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	переменный ток	＜110A
	Ток утечки	＜3.0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	В настоящее время	The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
	Перенапряжение	Users can set the overvoltage value to shut down the output voltage, and restore after restart
	Перегрев	Shut down the output, automatically recover or restart after the temperature drops
Функция	Регулировка выходного напряжения	0 – 26.4V	0 – 39.6V	0 – 52.8V	0 – 66V	0 – 121V	0 – 242V
	Корректировка постоянного тока на выходе	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	485 communication	Протокол связи MODBUS
	Isolating auxiliary power supply	12V 0.5A (Need customization)
	Output remote control switch	Default power on, high level power off （5V-12V）(Need customization)
	Alarm output	Power Good Signal (Dry Contact≦36V,0.1A)(Need customization)
ENVIRONMENT	Working TEMP.	-20 – +60℃
	Рабочая влажность	-20 – 90% RH No condensation
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH No condensation
	Вибрация	10 – 500Hz, 2G 10 Min/Cycle, X、Y、Z 60 Min
SAFETY&EMC	Сопротивление изоляции	Input to Output:100Mhms/500VDC/25℃/70%RH
SAFETY&EMC	Выдерживая напряжение	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Другой	Измерение	455345251mm（LWH）
Другой	Вес нетто	22 KG
Примечание	1、All parameters NOT specially mentioned are measured at 23 0 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.