SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Supports 90-270VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Humiling ng isang quote

Paglalarawan

Mga tampok

1, Saklaw ng pag-input ng boltahe: 95-265VAC
2、Uri ng proteksyon: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Episyente sa pagtatrabaho hanggang sa 93%
5、485 kontrol sa komunikasyon

Mga Teknikal na Parameter

Modelo		SP-18000-24	SP-18000-36	SP-18000-48	SP-18000-60	SP-18000-110	SP-18000-220
OUTPUT	DC boltahe	24V	36V	48V	60V	110V	220V
	Na-rate ang kasalukuyang	740A	500A	375A	300A	163.6A	81.8A
	Kasalukuyang saklaw	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	Rated power	18000W
	Ripple & Roise	500mV	500mV	600mV	600mV	1000mV	1500mV
	Patuloy na kasalukuyang saklaw	12 – 24V	18 – 36V	24 – 48V	30 – 60V	55 – 110V	110 – 220V
	Pagpapahintulot sa boltahe	± 1.0%
	Regulasyon ng linya	± 1.0%
	Load regulation	± 1.0%
	Setup risetime	1500mS，700mS/230VAC
INPUT	Saklaw ng boltahe	95-190VAC,195-265VAC
	Saklaw ng dalas	45Hz – 65Hz
	Power factor	PF≥0.99/230VAC
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	AC Current	<110A
	Agos ng pagtagas	＜3.0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	Maaaring itakda ng user ang over-current na halaga upang maantala ang output ng 5 segundo at pagkatapos ay i-shut down ang output, at pagkatapos ay ipagpatuloy pagkatapos i-restart.
	Sobrang boltahe	Maaaring itakda ng mga user ang overvoltage na halaga upang isara ang boltahe ng output, at ibalik pagkatapos ng pag-restart
	Lampas sa temperatura	I-shut down ang output, awtomatikong bawiin o i-restart pagkatapos bumaba ang temperatura
Function	Pagsasaayos ng boltahe ng output	0 – 26.4V	0 – 39.6V	0 – 52.8V	0 – 66V	0 – 121V	0 – 242V
	Output pare-pareho ang kasalukuyang pagsasaayos	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	485 communication	MODBUS Communication Protocol
	Isolating auxiliary power supply	12V 0.5A (Kailangan ng pagpapasadya)
	Output remote control switch	Default power on, high level power off （5V-12V）(Need customization)
	Alarm output	Power Good Signal (Dry Contact≦36V,0.1A)(Kailangan ng pagpapasadya)
ENVIRONMENT	Working TEMP.	-20 – +60 ℃
	Paggawa ng kahalumigmigan	-20 – 90% RH Walang condensation
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH No condensation
	Panginginig ng boses	10 – 500Hz, 2G 10 Min/Cycle, X, Y, Z 60 Min
SAFETY&EMC	paglaban sa paghihiwalay	Input to Output:100Mhms/500VDC/25℃/70%RH
SAFETY&EMC	Makatiis ng boltahe	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Iba pa	Dimensyon	455345251mm（LWH）
Iba pa	Net timbang	22 KG
Puna	1、All parameters NOT specially mentioned are measured at 23 0 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.