SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Descargar Solicitar una cotización

Descripción

Resumen

Single output: Power 18000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Características

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Especificaciones generales

Modelo	SP-18000-30	SP-18000-36	SP-18000-48	SP-18000-60	SP-18000-110	SP-18000-220
DC voltage	30V	36V	48V	60V	110V	220V
Corriente nominal	480A	400A	300A	240A	130.9A	65.5A
Rango actual	0-480A	0-400A	0-300A	0-240A	0-130.9A	0-65.5A
Potencia nominal	18000W
Onda	500mV	500mV	600mV	600mV	1000mV	1500mV
Rango óptimo de corriente constante	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Rated voltage accuracy	±1.0%
Regulación de línea	±1.0%
Regulación de carga	±1.0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Current 100%)
Rango de frecuencia	45Hz-65Hz
Factor de potencia	PF≥0.99/230VAC (Fully loaded)
Efficiency(MAX)	0.91	0.915	0.92	0.92	0.925	0.93
Corriente alterna	<110A
Corriente de fuga	<3,0 mA/240 VCA
Cortocircuito	Enter the constant curent and the voltage is less than 10%of the rated voltage,turm off and lockthe output after 1 second,and resume after restart
Over current	The user can set the over-current value to delay the output for 5 seconds and then shut down the output,and then resume after restarting
Over voltage	Users can set the overvoltage value to shut down the output voltage,and restore after restart
Sobre temperatura	Shut down the output,automatically recover or restart after the temperature drops.
Ajuste del voltaje de salida	0-33V	0-39,6V	0-52,8 V	0-66V	0-121V	0-242V
Ajuste de corriente constante de salida	0-480A	0-400A	0-300A	0-240A	0-130.9A	0-65.5A
485 Communications	MODBUS Communication Protocol
lsolating auxiliary powersupply	12V0.5A (Need customization)
Output remote control switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm output	Power Good Signal (Dry Contact≤36V,0.1A) (Need customization)
Working TEMP.	-20-+60℃
Working humidity	-20-90%RHnon-condensing
Storage temperature and humidity	-40-+85℃,10-95%RH non-condensation
Vibración	10-500Hz,2G 10mins/T,×、Y、Zaxis 60 minutes each
Resistencia de aislamiento	Input to Output:100Mhms/500VDC/25°C/70%RH
Voltaje de soporte	I/P-O/P:2KVAC IP-FG:2KVACO/P-FG:0.5KVAC
Dimensión	455×345×251mm
Peso neto	22 kg