SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Télécharger Demander un devis

Description

Résumé

Single output: Power 18000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Caractéristiques

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Spécification générale

Modèle	SP-18000-30	SP-18000-36	SP-18000-48	SP-18000-60	SP-18000-110	SP-18000-220
Tension continue	30V	36V	48V	60V	110V	220V
Courant nominal	480A	400A	300A	240A	130.9A	65,5A
Plage actuelle	0-480A	0-400A	0-300A	0-240A	0-130.9A	0-65,5A
Puissance nominale	18000W
Ondulation	500mV	500mV	600mV	600mV	1000mV	1500mV
Plage optimale à courant constant	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Précision de la tension nominale	±1,0%
Régulation de ligne	±1,0%
Régulation de charge	±1,0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Plage de tension	95-190VAC (courant de sortie 50%), 195-265VAC (courant de sortie 100%)
Gamme de fréquence	45Hz-65Hz
Facteur de puissance	PF≥0.99/230VAC (Fully loaded)
Efficacité (MAX)	0.91	0.915	0.92	0.92	0.925	0.93
Courant alternatif	<110A
Courant de fuite	<3,0 mA/240 VCA
Court-circuit	Enter the constant curent and the voltage is less than 10%of the rated voltage,turm off and lockthe output after 1 second,and resume after restart
Over current	The user can set the over-current value to delay the output for 5 seconds and then shut down the output,and then resume after restarting
Over voltage	Users can set the overvoltage value to shut down the output voltage,and restore after restart
Surchauffe	Shut down the output,automatically recover or restart after the temperature drops.
Réglage de la tension de sortie	0-33V	0-39,6V	0-52,8V	0-66V	0-121V	0-242V
Réglage du courant constant de sortie	0-480A	0-400A	0-300A	0-240A	0-130.9A	0-65,5A
485 Communications	Protocole de communication MODBUS
lsolating auxiliary powersupply	12V0.5A (Need customization)
Output remote control switch	Default power on,high level power off (5V-12V)(Need customization)
Alarm output	Power Good Signal (Dry Contact≤36V,0.1A) (Need customization)
Working TEMP.	-20-+60℃
Humidité de travail	-20-90%RHnon-condensing
Température et humidité de stockage	-40-+85℃,10-95%RH non-condensation
Vibration	10-500Hz,2G 10mins/T,×、Y、Zaxis 60 minutes each
Résistance d'isolement	Input to Output:100Mhms/500VDC/25°C/70%RH
Tension avec	I/P-O/P:2KVAC IP-FG:2KVACO/P-FG:0.5KVAC
Dimension	455×345×251mm
Poids net	22 kg