Waterproof IP67 LED driver AC 110v/220v to constant DC output 15W power supply

LPV-15 is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs.
Depending on its types or design concept, some of them not only have PFC capability but also can be located in harsh environments such as dusty, humid places.LED power supplies include metal cases, plastic cases, and PCB types.If you have any questions, please do not hesitate to contact us at E-posta: [email protected]

İndirmek Teklif isteyin

Tanım

Özellikler ve Model

Modeli		LPV-15-12	LPV-15-24
Çıktı	DC Gerilim	12V	24V
	Gerilim Toleransı	±1%	±1%
	Nominal Akım	1.1A	0.7A
	Mevcut Aralık	0~1A	0~0.5A
	Nominal Güç	15W	15W
	Dalgalanma ve Gürültü	120mvp-p	150mvp-p
Giriş	Gerilim Aralığı	85~264VAC, 235~373VDC
	Sıklık	47~63HZ
	Alternatif Akım	0.1A/230VAC
	Yeterlik	78%	80%
	Ani Akım	Cold start current 30A/230VAC
	Kaçak Akım	<0.5mA/240VAC
Koruma	Aşırı Yük	Rated output power 105%~135%start overload protection
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Aşırı Gerilim	15.6~17.8V	30.6~33.2V
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Over Temperature	When the temperature of the transistor’s inner node is over 150°C
		Start over temperature protection
		Protection mode: cutoff output, auto-recovery after temperature becomes normal
Çevre	Çalışma Sıcaklığı, Nem	-10°C ~ +60°C, 20%~90%RH
	Depolama Sıcaklığı Nem	-20°C ~ +85°C, 10%~95%RH non condensing
	Withstand Vibration	10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes
Emniyet	Dayanım Gerilimi	G/Ç/P: 1,5KVAC I/P-FG: 1,5KVAC Ç/P-FG: 0,5KVAC
	Isolated Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC
Fits	Güvenlik Standardı	Fit UL1012, IP67 protect level
standard	EMC Standardı	Fit EN55022, CLASS
Diğerleri	Boyut	1823020mm (LWH)
	Ağırlık/Paketleme	0.2kg/80pcs/16kg/0.027m³/0.94CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-ire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation