Waterproof IP67 LED driver AC 110v/220v to constant DC output 15W power supply

LPV-15 is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs.
Depending on its types or design concept, some of them not only have PFC capability but also can be located in harsh environments such as dusty, humid places.LED power supplies include metal cases, plastic cases, and PCB types.If you have any questions, please do not hesitate to contact us at E-Mail: [email protected]

Herunterladen Fordern Sie ein Angebot an

Beschreibung

Spezifikationen und Modell

Modell		LPV-15-12	LPV-15-24
Ausgabe	Gleichspannung	12V	24V
	Spannungstoleranz	±1%	±1%
	Nennstrom	1.1A	0,7A
	Aktueller Bereich	0~1A	0~0.5A
	Nennleistung	15W	15W
	Welligkeit und Lärm	120mvp-p	150mvp-p
Eingang	Spannungsbereich	85~264VAC, 235~373VDC
	Frequency	47~63HZ
	Wechselstrom	0.1A/230VAC
	Effizienz	78%	80%
	Einschaltstrom	Cold start current 30A/230VAC
	Leckstrom	<0,5 mA/240 VAC
Schutz	Überlastung	Rated output power 105%~135%start overload protection
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Überspannung	15.6~17.8V	30.6~33.2V
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Over Temperature	When the temperature of the transistor’s inner node is over 150°C
		Start over temperature protection
		Protection mode: cutoff output, auto-recovery after temperature becomes normal
Umfeld	Working Temp, Humidity	-10°C ~ +60°C, 20%~90%RH
	Lagertemp. Luftfeuchtigkeit	-20°C ~ +85°C, 10%~95%RH non condensing
	Withstand Vibration	10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes
Sicherheit	Spannungsbeständig	I/P-O/P: 1.5KVAC I/P-FG: 1,5 kVAC O/P-FG: 0,5 KVAC
	Isolated Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC
Fits	Sicherheitsstandard	Fit UL1012, IP67 protect level
standard	EMV-Standard	Fit EN55022, CLASS
Andere	Dimension	1823020mm (LWH)
	Weight/Packing	0.2kg/80pcs/16kg/0.027m³/0.94CUFT
Notiz	1. Alle NICHT ausdrücklich erwähnten Parameter werden bei 230 VAC Eingang, Nennlast und 25 °C Umgebungstemperatur gemessen.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-ire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation