Waterproof IP67 LED driver AC 110v/220v to constant DC output 15W power supply

LPV-15 is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs.
Depending on its types or design concept, some of them not only have PFC capability but also can be located in harsh environments such as dusty, humid places.LED power supplies include metal cases, plastic cases, and PCB types.If you have any questions, please do not hesitate to contact us at E-mail: [email protected]

Scaricamento Richiedi un preventivo

Descrizione

Specifiche e modello

Modello		LPV-15-12	LPV-15-24
Produzione	Tensione CC	12V	24 V
	Tolleranza di tensione	±1%	±1%
	Corrente nominale	1.1A	0,7 A
	Intervallo corrente	0~1A	0~0.5A
	Potenza nominale	15 W	15 W
	Ondulazione e rumore	120mvp-p	150mvp-p
Ingresso	Intervallo di tensione	85~264VAC, 235~373VDC
	Frequenza	47~63HZ
	Corrente CA	0.1A/230VAC
	Efficienza	78%	80%
	Corrente di spunto	Cold start current 30A/230VAC
	Corrente di dispersione	<0.5mA/240VAC
Protezione	Over Load	Rated output power 105%~135%start overload protection
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Sovratensione	15.6~17.8V	30.6~33.2V
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Over Temperature	When the temperature of the transistor’s inner node is over 150°C
		Start over temperature protection
		Protection mode: cutoff output, auto-recovery after temperature becomes normal
Ambiente	Temperatura di lavoro, umidità	-10°C ~ +60°C, 20%~90%RH
	Storage Temp. Humidity	-20°C ~ +85°C, 10%~95%RH non condensing
	Withstand Vibration	10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes
Sicurezza	Resistere alla tensione	I/P-O/P: 1,5 KVAC I/P-FG: 1,5 KVAC O/P-FG: 0,5 KVAC
	Isolated Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC
Fits	Safety Standard	Fit UL1012, IP67 protect level
standard	Norma EMC	Fit EN55022, CLASS
Altri	Dimensione	1823020mm (LWH)
	Peso/Imballo	0.2kg/80pcs/16kg/0.027m³/0.94CUFT
Nota	1. Tutti i parametri NON specificatamente menzionati sono misurati con ingresso 230 V CA, carico nominale e 25°C di temperatura ambiente.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-ire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation