SP-18000 Single Output Power Supply With PFC

SP-18000 is a 18KW single output chassis type AC to DC power supply.
Menyokong input jarak penuh 90-270VAC, input voltan yang luas, tidak perlu bertukar. [email protected]

Minta sebut harga

Penerangan

Ciri -ciri

1 、 Julat Input Voltan: 95-265VAC
2 、 Jenis Perlindungan: litar pintas/overcurrent/overvoltage/overtemperature
3 、 Faktor Kuasa PF ≧ 0.99
4 、 Kecekapan kerja sehingga 93%
5、485 Kawalan Komunikasi

SP-18000 Single Output Power Supply With PFC title=

Parameter teknikal

Model		SP-18000-24	SP-18000-36	SP-18000-48	SP-18000-60	SP-18000-110	SP-18000-220
OUTPUT	Voltan DC	24V	36V	48v	60v	110v	220v
	Arus dinilai	740A	500A	375A	300a	163.6A	81.8a
	Julat Semasa	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 - 81.8a
	Rated power	18000W
	Ripple & Roise	500mv	500mv	600mv	600mv	1000mv	1500mv
	Constant current range	12 - 24V	18 - 36V	24 - 48V	30 - 60V	55 - 110V	110 - 220V
	Toleransi voltan	± 1.0%
	Peraturan garis	± 1.0%
	Load regulation	± 1.0%
	Setup risetime	1500mS，700mS/230VAC
INPUT	Julat voltan	95-190VAC,195-265VAC
	Julat kekerapan	45Hz - 65Hz
	Power factor	PF≥0.99/230VAC
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	AC Current	＜110A
	Leakage current	＜ 3.0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	Pengguna boleh menetapkan nilai yang berlebihan untuk melambatkan output selama 5 saat dan kemudian menutup output, dan kemudian disambung semula selepas dimulakan semula.
	Over voltage	Pengguna boleh menetapkan nilai overvoltage untuk menutup voltan output, dan pulihkan selepas dimulakan semula
	Lebih dari suhu	Matikan output, pulih atau mulakan semula secara automatik selepas suhu jatuh
Fungsi	Pelarasan voltan output	0 - 26.4v	0 - 39.6V	0 - 52.8v	0 - 66V	0 - 121V	0 - 242V
	Output pelarasan arus berterusan	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 - 81.8a
	485 communication	Protokol Komunikasi Modbus
	Isolating auxiliary power supply	12v 0.5a (memerlukan penyesuaian)
	Output remote control switch	Default power on, high level power off （5V-12V）(Need customization)
	Alarm output	Isyarat baik kuasa (kenalan kering ≦ 36V, 0.1a) (memerlukan penyesuaian)
ENVIRONMENT	Working TEMP.	-20 - +60 ℃
	Working humidity	-20 -90% RH Tiada Pemeluwapan
	Storage TEMP. and humidity	-40 - +85 ℃, 10 -95% RH Tiada pemeluwapan
	Getaran	10 - 500Hz, 2g 10 min/kitaran, x 、 y 、 z 60 min
SAFETY&EMC	Rintangan pengasingan	Input ke Output: 100mhms/500VDC/25 ℃/70%rh
SAFETY&EMC	Menahan voltan	I/P-O/P: 2KVAC I/P-FG: 2KVAC O/P-FG: 0.5KVAC
Yang lain	Dimensi	455345251mm（LWH）
Yang lain	Berat bersih	22 KG
Catatan	1、All parameters NOT specially mentioned are measured at 23 0 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.