S-1200W series normal single switching power supply

WeHo professional 1200W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at Email: [email protected]

Download Request A Quote

Description

Specifications&Model

Specification	S-1200-12	S-1200-24	S-1200-36	S-1200-48
DC output voltage,current	12V 0～100A	24V 0～50A	36V 0～33A	48V 0～25A
Wave and noise	150mVp-P	180mVp-P	180mVp-P	240mVp-P
Inlet wire stability	±0.5%	±0.5%	±0.5%	±0.5%
Load stability	±0.5%	±0.5%	±0.5%	±0.5%
Efficiency	0.8	0.82	0.84	0.85
Adjustable range for DC voltage	±10%	±10%	±10%	±10%
Input voltage range	100~132VAC/200~264VAC by switch 254~370VDC 47～63Hz
Impact current	Cold start current 45A/230VAC
Overload protection	105%～135%cut off the output,automatic recovery
Other protection	Over current protection /Short-circuit protection
Setup,rise,hold up time	2000ms,50ms,20ms/230VAC at full load
Withstand voltage	I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1minute
Isolation resistance	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Working temperature	-10℃~+50℃
Dimension	291×132×68mm
Weight	2.65kg
Packing	37.5×31×25.5CM/6PCS/16kg